[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] sealing a cardboard form



A couple of comments inline: 

> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx 
> [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of PAUL THOMPSON
> Sent: Friday, July 24, 2009 3:36 PM
> To: Tesla Coil Mailing List
> Subject: Re: [TCML] sealing a cardboard form
> 
> ----- Original Message ----- 
> From: "DC Cox" <resonance@xxxxxxxxxxxx>
> To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
> Sent: Friday, July 24, 2009 4:20 PM
> Subject: Re: [TCML] sealing a cardboard form
> 
> 
> >A Tesla coil secondary coilform is subjected to very high potential
> > stresses.  Why not just use a product especially developed 
> to seal high
> > voltage transformer windings?
> 
> Because improvisation and learning is why I do this. If I 
> want a perfect 
> secondary, I can buy one. But why bother?


How many hours do you want to spend to find out that your 'great idea' was
an engineering rathole and that your time and materials have been wasted.
There are a lot of people offering advice here and the reason that people
keep coming back to specific things is that they have been tested by the
community and have been found to work the best.

MMC's, specific coatings, designs for spark gaps, etc...


> 
> 
> > Dolph's AC-43 is one such liquid especially designed with 
> high dielectric
> > resistance, and anti-tracking properties.
> 
> Do you sell this stuff or what?
> 

He probably does but I would doubt that he makes a lot of money off of it.
This is especially a factor considering just how many gallons of other
paints / varnishes / coatings / etc... he probably tried out before he found
that Dolph's worked the best.


I would hate to see the number of 5-gallon tubs of very expensive stuff he
has with just a couple pints taken out and a faint "Oh Snap!" still hanging
in the air.


> >
> > You certainly can take a chance with other products, but if 
> they don't do
> > the job then you have to completely replaced the coilform 
> and rewind the
> > coil.
> 
> We learn by doing.
> 


Or by watching other people doing the same thing and learning from their
mistakes.


Set RANT=off

Cheers!
Dave

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla