[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Flat Spiral Primary

To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: [TCML] Flat Spiral Primary
From: Mike Thompson <mthompson14@xxxxxxxxx>
Date: Wed, 22 Jul 2009 15:50:34 -0700 (PDT)
Cc:
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s1024; t=1248303034; bh=ZY+JVacC3joFaqXLqw7qydtENueEvV/qKBCc3JpAPYM=; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type; b=a3MywTn2pRfLGvn5ZK+5BI7Qe9kTKkMAHJqsPRmZ9qcaCe0AdqSIN6Eoov56Hv/F00pQkGn9+TalcomkS1Wlu9Zs+++1guGVsIEkSjn9qbIi0QYjXOaOtfBXLrgrgKVXPaXkESsNrUI01Fd/PW7nSDrukImnh7OEoNgd37LSy1Q=
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type; b=DdAMm0beJ5z2/+cERkIOebfL88lozc34A4J6Vo47U6us5meHS/CMBzCZxBSME6pxG0cwKZXKfOF+3L/POst2JAfNNEcIUOWaL6Y0WuJgd7mCpc1QIL2M7TBQ3VjCMFUTsHQebfOT/H1ZBFJltqCZzxBZQpka9UVgveXQjxLgOrI=;
In-reply-to: <CB9CF52564D6437E9806A03C6C8CDC8E@JimonVista32>
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@www.pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.www.pupman.com>
List-post: <mailto:tesla@www.pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

Hello All,
 
  I have been playing around with some calculations for a flat spiral primary coil, and it turns out that the little bit of .25 inch copper tubing I have is not long enough to for my needs. I was wondering what some of the draw backs of using 9 gauge galvenized fencing wire would be. It is cheaper and I get twice as much wire for half the price of copper.
 
Any thoughts?
Thanks
Mike T.
 



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- RE: [TCML] Flat Spiral Primary
  - From: Lau, Gary
- Re: [TCML] Flat Spiral Primary
  - From: jimlux

References:
- RE: [TCML] High Voltage design questions and considerations
  - From: Jim Mora

Prev by Date: [TCML] Tesla coil frequency finder?
Next by Date: [TCML] SSTC musical coils
Previous by thread: RE: [TCML] High Voltage design questions and considerations
Next by thread: RE: [TCML] Flat Spiral Primary
Index(es):
- Date
- Thread