[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Speaking of Mosfets and oscillators - Push Pull

To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] Speaking of Mosfets and oscillators - Push Pull
From: Scott Bogard <sdbogard@xxxxxxxxx>
Date: Tue, 24 Feb 2009 17:39:43 -0500
Cc:
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:content-type :content-transfer-encoding; bh=iYindv4C+Dv9qfTOKlBLCj3oHxlngGnQ14dlTG+ynfY=; b=MMWpNBN10RLp+fWRQ8Tg1ydhJoii1g2seMpLD3WNMzECnuivfehC9T3KNG+fh7NfAK cMnK/EGWj++JAGLOpv/FdZe5uyIBf3tooN5xp9DLyeVeJCBdvCWkh9AO9K745gwPKimX Z4EUrQ7nVEhDgNFCXLAIWpLC7mjeXM01bTvkc=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type:content-transfer-encoding; b=A3U0dy3DLvPSGF0OCK3Ah0JNc5qQmBdSK8gevuutxOZUAme5LoEGLaRbkh6qwLgDgL KCCqoPb5jdZtxbvjuaolyohKb5aCqvxJAhta3SjBVmyI+go3KJTQ5p8qMJQ1Bjpf+PHh yawLxKcdaIPmnXBPuRg8yUlwyGsmwoyBJWBUY=
In-reply-to: <49A473F0.5050002@xxxxxxxxxxx>
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@www.pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.www.pupman.com>
List-post: <mailto:tesla@www.pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=unsubscribe>
References: <987E0065832D4B959B76C9F697A0532F@JimonVista32> <af67095b0902240941n1bb6205dy6830fda288ff3ff0@xxxxxxxxxxxxxx> <49A473F0.5050002@xxxxxxxxxxx>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

Ed,
     No, not really, but the stuff I do is all 12 V so I figured it
was no big deal, perhaps I am wrong.

Scott Bogard.
>
> 	Are you always careful about GATE breakdown voltage?  Easiest way I know to
> wreck a power MOSFET is to break down the gate insulation.
>
> Ed
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] Speaking of Mosfets and oscillators - Push Pull
  - From: Ed Phillips

References:
- [TCML] Speaking of Mosfets and oscillators - Push Pull
  - From: Jim Mora
- Re: [TCML] Speaking of Mosfets and oscillators - Push Pull
  - From: Scott Bogard
- Re: [TCML] Speaking of Mosfets and oscillators - Push Pull
  - From: Ed Phillips

Prev by Date: Re: [TCML] Speaking of Mosfets and oscillators - Push Pull
Next by Date: RE: [TCML] Off Grid Tesla Coil (sort of)
Previous by thread: Re: [TCML] Speaking of Mosfets and oscillators - Push Pull
Next by thread: Re: [TCML] Speaking of Mosfets and oscillators - Push Pull
Index(es):
- Date
- Thread