[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Speaking of Mosfets and oscillators - Push Pull



If I find some time I'll try to put that circuit together, though I'd
like to point out that this guy did somehow get a Royer/Armstrong
oscillator to work with FETs in a TC application.
http://users.skynet.be/BillsPage/TeslaPage.html
I've tried this with flybacks and the MOSFETs burn or short, but I was
using much different resistor values and IRF640? fets.  I think
MOSFETs are just prejudice against me, Oh well.

Scott Bogard.

On 2/24/09, Jim Mora <wavetuner@xxxxxxxxx> wrote:
> Hello Scott, Group,
>
> The issue of MOSFET and Armstrong oscillators recently came up. I took a
> look at various Hartley and Culpitts oscillators while I was at it. Then
> what I have been thinking about far off with my (4) 833a's came to mind and
> push/pull operation. Has anyone played around with this MOSFET
> configuration? How about it Scott- it is always a learning experience. You
> gotta have some smoke to make a fire;-)
>
> Jim Mora
>
> http://www.solderingpoint.com/projects/rfpp/pushpull.php
>
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla