Re: [TCML] TUNGSTEN TUNGSTEN TUNGSTEN

[Jeff Larson <jeff@xxxxxxxxxxxxx>]

I have used a dremel and a cut off disk. mounted to the tool post of my 
lathe.  A similar thing could be done with a dremel and a drill press.  
I kept the shop vac running sucking up the dust as I cut.  I also wear a 
respirator when cutting W.  The cut off disk lasts a surprisingly long 
time.  I am not sure why.  Cutting steel seems to use up the disks much 
faster.

Jeff Larson

Harold Weiss wrote:
> I use one of the Dremel fiberglass reinforced cut off disks.  Remember 
> to do it outside if you're cutting 2% thoriated tungsten, and take a 
> shower as soon as you're done cutting to get the dust off you.
>
> David E Weiss
>
>
>
>
> Are you cutting 1/2" or larger rod this way? I've cut small diameter 
> rod with a Dremel cutoff disk, but I feel like 1/2" may be a bit much.
>
> Adam
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla