Re: [TCML] Bi-Polar coil construction plans/tips/etc ?

[David Dean <deano@xxxxxxxxxxxxxxxx>]

On Thursday 02 April 2009 07:03:03 am Daniel Kline wrote:
> I once made a bi-polar coil that produced sparks longer than the
> secondary. Actually, there were three coils: The bipolar secondary, and
> an additional vertical coil on each end of the bipolar coil. The
> secondary coil was inside a lucite tube, and the additional coils were
> connected to the secondary by copper tubing. The primary coupling was
> fairly tight and sparks would play all over the lucite if the additional
> coils weren't breaking out at their breakout points.

Wow! A bi-polar Magnifier! Any pictures?

later
deano
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla