RE: [TCML] Bi-Polar coil construction plans/tips/etc ?

["Jim Mora" <wavetuner@xxxxxxxxx>]

Hi Dave,
I was thinking of doing just that in later days... it seems it is wound one
direction and twice as long. Leave a gap of a couple of inches in the center
to adjust coupling. That was the advice I was given from the list. End to
End electrodes arcs are pretty impressive. I have seen Dr Sparks! He warned
me to move back a little - glad I did!

Jim Mora

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of david baehr
Sent: Tuesday, March 31, 2009 7:49 PM
To: tesla@xxxxxxxxxx
Subject: [TCML] Bi-Polar coil construction plans/tips/etc ?


was thinkin' of building one.... prob 6" dia  sec.   are output sparks
generaly limited to the length of the sec. , or less ? ....is the sec. wound
in the same direction ,from end to end ?, 

   would following plans from the 'High  Frequency Apparatus' book be of any
use ??

 

                          Thanks,dave :-)

_________________________________________________________________
HotmailR is up to 70% faster. Now good news travels really fast.
http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_70faster_032009__
_____________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla