Re: [TCML] VTTC Coupling

["DC Cox" <resonance@xxxxxxxxxxxx>]

John:

What coupling k value have you measured on your 833 coil?  I would guess
around 0.2 ???

What is possible before destruction begins?

I've read one person has his grid feedback coil nearly 40% up the height of
the sec coil.  And he's getting very good outputs.

Dr. Resonance




On Mon, Sep 15, 2008 at 3:34 PM, <futuret@xxxxxxx> wrote:

> I don't think it would work well.
>
> John
> -------
>
>
> -----Original Message-----
> From: Phillip Slawinski <pslawinski@xxxxxxxxx>
> To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
> Sent: Mon, 15 Sep 2008 3:50 pm
> Subject: [TCML] VTTC Coupling
>
>
>
> Is it possible to over couple a VTTC?  I have a 3.5" secondary, and I have
> a
> 4.5" form that I could use for  my primary.  If I used the 4.5" form would
> this be taking things a little too far?  Would there be any real benefit to
> doing this?
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla