[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Secondary Coil Form

To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Subject: [TCML] Secondary Coil Form
From: robert@xxxxxxxxxx
Date: Wed, 10 Sep 2008 19:12:21 +0000
Cc:
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Importance: Normal
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@www.pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.www.pupman.com>
List-post: <mailto:tesla@www.pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx
Sensitivity: Normal

I was looking at some form tubes for concrete, they are made of cardboard and come in various sizes. Is there a benefit to using that as a secondary form over pvc? I'm aware of the rf properties of pvc,but does it make noticeable difference? 

Rob
KI4HXT
Sent via BlackBerry by AT&T
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- RE: [TCML] Secondary Coil Form
  - From: Lau, Gary
- Re: [TCML] Secondary Coil Form
  - From: DC Cox

Prev by Date: Re: [TCML] Copper wire resistance calculation ?
Next by Date: RE: [TCML] Secondary Coil Form
Previous by thread: [TCML] G10 disk
Next by thread: RE: [TCML] Secondary Coil Form
Index(es):
- Date
- Thread