Re: [TCML] Could this be a breakout point?

[bartb <bartb@xxxxxxxxxxxxxxxx>]

Steve, what I described is not what you showed in your picture to the 
TCML (it is not what you have now). You showed termination on the side 
of the form (a bolt). I described termination from a top cap. Very 
different as you don't have a top cap.

Regards,
Bart

Stephen J. Hobley wrote:
> My goal has been to terminate the coil wire on the cylinder. 
>
> The solution you describe is what I have now, and I'm concerned about
> the fragility of the coil wire.
>   
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla