RE: [TCML] Re: Looking for a NICE plate transformer

["Jim Mora" <wavetuner@xxxxxxxxx>]

Let's get off the grammar thing. I think it is essential and decent to read
what you just wrote before you send it out to >900 people to puzzle through.
Lets forgive this one, after all the "V" is next to the "C" key.

Jim Mora

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Phillip Slawinski
Sent: Friday, October 10, 2008 8:46 PM
To: Tesla Coil Mailing List
Subject: Re: [TCML] Re: Looking for a NICE plate transformer

It's not just old folks that care about grammar, spelling, punctuation,
etc.  I'm twenty-one and I don't buy into this whole instant message
shorthand thing.

On Fri, Oct 10, 2008 at 14:50, <mddeming@xxxxxxx> wrote:

> Hi David,
>
> The very fact that you even give a "ratzass" about whether an
> email looks like it was written by an illiterate or not, means you
> must be pretty old - perhaps even over 30!! ;^)))
>
> Matt D.
>
> "The fight for literacy on the internet is akin to pushing Jello uphill
> on the point of a sword"" -Anon
>
> -----Original Message-----
> From: David Rieben <drieben@xxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Sent: Sun, 5 Oct 2008 8:30 am
> Subject: [TCML] Re: Looking for a NICE plate transformer
>
>
>
> Hi all,
>
> DOH! A "niVe" plate transformer? Please excuse my subject line
> typo. That should have read "looking for a niCe plate transformer"
> Yesterday was a LONG day for me and I was quite exhausted
> when I posted this letter ;^) Anyway, I am looking for a "nice"
> plate transformer with voltage/current specs in the range that
> I mentioned.
>
> Remembering to proof read before hitting the send button,
> David
> ----- Original Message -----
> From: David Rieben
> To: Tesla list
> Cc: David Rieben
> Sent: Saturday, October 04, 2008 9:15 PM
> Subject: Looking for a nive plate transformer
>
>
> Hi all,
>
> I have been running my VTTC on 2 seriesed ouput MOTs and
> am finding that the MOTs can get smoking hot and start to
> stink during operation. I was wondering if anyone might have
> a plate transformer rated in the 4 to 5 kV @ 600 to 800 mA
> range that they would be willing to sell or trade for? Decent
> plate transformers with voltage and current ratings in this
> neighborhood seem hard to locate on ebay these days.
> Peter Dahl made ones show up some but are quite pricey.
>
> Thanks,
> David
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla