[TCML] Strike rail hits and loud bangs

["Stephen J. Hobley" <shobley@xxxxxxxxxx>]

We have a fairly simple coil using a 60ma NST. Recently I changed the tap point on the primary and by chance hit a really sweet spot. 

Usually the Tesla Tuner is pretty accurate and gives good results, but in this case it did not indicate that this tap point was a good one.

The streamer length has increased by at least 50% - but we did notice some rather worrying "bangs" from the Terry filter spark gap when the strike rail is being hit. Is this normal? 

Is it possible to tune a Tesla coil into a self-destructive state?

I would take some pictures, but the darned thing scares me to death...
:-)

Steve

 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla