Re: [TCML] questions about my coil, 12/60 NST

["DC Cox" <resonance@xxxxxxxxxxxx>]

for copper pipe or hyperbaric gap use 1.3 to 1.5 times resonant value.

for synchro rsg use 2.6 times resonant value.

resonant value is easily calculated by using   Xc = Z = 1/377 * C  (on a 60
Hertz system)

Z = E / I, in your case, 12,000 volts / .06 Amps = 200,000 Ohms = 2e5 Ohms

Dr. Resonance




On Sun, May 4, 2008 at 10:59 PM, <Ln2guy42@xxxxxxx> wrote:

> Thanks!
> Now if I were to use a synchronous rotary spark gap on instead of a static
> gap on the same 12/60 NST how many times the resonant value cap should I
>  use?
>
> thanks,
>
> Amir M.
> 14yrs old
>
>
>
> **************Wondering what's for Dinner Tonight? Get new twists on
> family
> favorites at AOL Food.
> (http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla