RE: [TCML] tesla tuner

["McCauley, Daniel H" <daniel.h.mccauley@xxxxxxxx>]

Secondary resonance looks like a shorted impedance, therefore current
draw will be maximum (brightest)
Primary resonance (parallel) looks like a high impedance, therefore
current draw will be minium (dimmest)

You really dont' need to build anything if you have an audio oscillator
(such as HP200) or other function / signal generator.

Dan
 


Daniel McCauley
Transmitter / High Voltage Engineer
Lockheed Martin MS2
Mailstop 142-1
199 Borton Landing Road
Moorestown, NJ 08057
(856) 722-2387
daniel.h.mccauley@xxxxxxxx


-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
Behalf Of Stephen J. Hobley
Sent: Wednesday, March 26, 2008 11:55 PM
To: Tesla Coil Mailing List
Subject: [TCML] tesla tuner

Tesla Tuner

Am I right that if we build this, then we set it on the secondary first
to get the brightest LED / lowest frequency - then apply it to the
primary and adjust the tap to get the same brightness on the LED?

Steve

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla