[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Dual MOT SGTC



Hi list

I built these days another dual MOT for a friend (he needs it for a presentation or maibe to impress some other guys, who knows). I dont have the time to set a web page, but I made a quick movie presentation (sort of...) and some "action" movies.

The power source is just two MOTs in serie (4-4.5 kV output), inductive ballasted on the low voltage side. I still believe that it is the cheapest solution for the eastern Europe where the NSTs are still rare. They give enough power for a healthy streamer and if they are well ballasted they can get some more voltage input (from a variac) without saturation (just more voltage and lower current in the same power area). The gap is not set very wide (to mantain the breakrate at resonable high level), so the streamer is not the longest possible, but is still very good for a presentation. I wound a bit longer secondary to prevent the strikes to the strikerail, allowing the full lenght for the streamers. Because the low kV input the primary cap cost is very low.

The "presentation" movie:

http://www.youtube.com/watch?v=scdu0BoxSaw

220 V from mains, multiple streamer output:

http://www.youtube.com/watch?v=5IdWf83LNvw

250 V from variac, more like a single streamer output:

http://www.youtube.com/watch?v=18yltrMa5AE

Enjoy

teslina





      
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla