RE: [TCML] threaded brass balls for safety gap

["Rich Schmuke" <rdj@xxxxxxxxxxxx>]

Yes they do but be careful and get solid brass or you might wind up with a
thin brass plating, I did. Remember the cheaper ones cost more in the long
run.

Rich , Kd0zz

As an act of plagiarism . Disclaimer: Any errors in spelling or facts are
transmission errors.


-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of neal@xxxxxxxxxxxxxxxx
Sent: Monday, June 23, 2008 12:03 PM
To: Tesla Coil Mailing List
Subject: RE: [TCML] threaded brass balls for safety gap

Home Depot has them in the hardware section as drawer/cabinet knobs, too.

Neal.

Quoting Rich Schmuke <rdj@xxxxxxxxxxxx>:

> If you want to save on shipping Home Depot has them in the lamp department
> for NST size gaps.
>
>
> Rich , Kd0zz
>
> As an act of plagiarism . Disclaimer: Any errors in spelling or facts are
> transmission errors.
>
>
> /tesla
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>




----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla