Re: [TCML] Secondary Coil

["DC Cox" <resonance@xxxxxxxxxxxx>]

Use double build magnet wire --- better insulation.

26 AWG will give you longer spark output.

Dr. Resonance




On Sat, Jun 14, 2008 at 3:59 PM, Nicholas J. Goble <ngoble@xxxxxxx> wrote:

> After obtaining my NST, I think my next step should be constructing the
> secondary coil.  I plan on having a 4" diameter coil using 24 AWG wire.
>  I got these figures off deepfriedneon.com.  Does this sound right?
>
> I am having a difficult time finding magnet wire in my area.  Would it
> be better for me just to order a spool of 1000' wire?  I've seen a few
> good listings on Ebay for about $30 and was wondering if this is a good
> way to obtain my wire?
>
> Thanks for all your answers.  I kind of feel guilty that I'm starting a
> lot of new threads that are probably second nature to experienced
> coilers.  Thanks for putting up with my constant nagging. ;^)
>
> Nicholas Goble
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla