Re: [TCML] pfc

[bartb <bartb@xxxxxxxxxxxxxxxx>]

400uF for a 12/60! Yowza! I think I do need to remove that PFC stuff 
from Javatc. That pretty much confirms it!
Bart

DC Cox wrote:
> You don't have to use PFC caps, but if you do it will reduce your full load
> current draw by several Amps.
>
> I use 400 uF with a 12/60 mA nst.
>
> Dr. Resonance
>
>
>
>
> On Wed, Jun 4, 2008 at 1:11 PM, douglas smith <eyemfedup2@xxxxxxxxx> wrote:
>
>   
> > hello
> >  i was just wondering if i have to use a pfc with an nst?
> >  I'm still trying to decide weather to cough up the buck for 12/60   or 2)
> > 12/30's
> >  also have been experimenting with unpotting and removing shunts
> >  is very messy so far
> >
> >
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> >
> >     
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
>   
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla