[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] pfc
You don't have to use PFC caps, but if you do it will reduce your full load
current draw by several Amps.
I use 400 uF with a 12/60 mA nst.
Dr. Resonance
On Wed, Jun 4, 2008 at 1:11 PM, douglas smith <eyemfedup2@xxxxxxxxx> wrote:
> hello
> i was just wondering if i have to use a pfc with an nst?
> I'm still trying to decide weather to cough up the buck for 12/60 or 2)
> 12/30's
> also have been experimenting with unpotting and removing shunts
> is very messy so far
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla