[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Poly thickness

To: tesla@xxxxxxxxxx (tesla list)
Subject: [TCML] Poly thickness
From: jhowson4@xxxxxxxxxxx
Date: Tue, 01 Jul 2008 12:50:10 +0000
Cc:
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@www.pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.www.pupman.com>
List-post: <mailto:tesla@www.pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

All this talk of putting poly on coils has got me wondering (how many coats of poly is enough)
i recently wound a 3" by 24" secondary with some #28.  first i coated the form with 1 coat of poly.   then i wound the coil.  Then I put on 4 more coats of poly.  is that enough? I ha\ve not had any problems with it yet.

jay howson
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] Poly thickness
  - From: Bert Hickman
- RE: [TCML] Poly thickness
  - From: Lau, Gary
- Re: [TCML] Poly thickness
  - From: DC Cox

Prev by Date: RE: [TCML] I think I ruined my 6" secondary.
Next by Date: Re: [TCML] I think I ruined my 6" secondary.
Previous by thread: Re: [TCML] Trouble with eBay wire
Next by thread: Re: [TCML] Poly thickness
Index(es):
- Date
- Thread