Re: [TCML] Re: Stacked Toroids

[resonance@xxxxxxxxxxxx]

I use approx 6 inches with toroids of his size, larger one on top.

Add the two cap values of each toroid and then divide by 1.7 to get an
approximate value, or just use JAVATC to get the almost exact value.

Dr. Resonance




> Hi all,
> This subject has been discussed some years ago but I wonder if there might
> be some new insight,
> I would like to maximize the total capacitance of two stacked spun Al
> toroids, one 24"x8" (26.5pF) and a 34.5"x8" (37.8pF) unit.
> I intend to use a spacer to separate the toroids but what would be an
> optimum length and diameter of the spacer to extract max capacitance in
> total,
> The secondary diameter is 12.4" and winding at 4.3 to 1 H/D.,
> Any suggestions much appreciated,
> Phillip.
>
>
>
>
> _____________________________________________________________________________
>
> 72 Tinwell Road, Stamford, Lincs PE9 2SD
>
> Tel: 01780 753008
>
>
> ---------------------------------
> Looking for last minute shopping deals?  Find them fast with Yahoo!
> Search.
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>


Dr. Resonance

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla