RE: [TCML] Filter Choice

[resonance@xxxxxxxxxxxx]

If you are not in a big rush to finish the filter, I have 500 pcs of both
the caps and also the varisters in my shop.

I also picked up a few hundred resistors at a surplus shop that work
excellent for the protective resistors in the circuit.  Values are
slightly higher, so we just solder 2 resistors in parallel to reduce the
resistance to the correct value.  We use these resistors in all of our
Terry filters.

Cost about $20 for all the parts you need including the expensive
resistors.  I will not be back in Wis. and in my shop until it warms up,
probably in mid-May (a winter from hell back in the midwest this season),
so contact me off-list if you are interested.

Dr. Resonance




> I understand.  Looks like I need to start gathering parts for the Terry
> Filter.  Taken from what I have seen on ebay, and prices of the components
> on digikey.com, this may be around $50.  Sound right?  Anyway, for the
> purposes of initial tuning, would it be safe to run the coil for quick 5
> sec
> intervals to tune it in the meantime?  Does the interfence/kick back build
> up as you run it, or appear at "random".  Thanks for responses so far.
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>


Dr. Resonance

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla