[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Primary tubing
The 3/8 inch tubing is more than adequate. It will work just fine
Garry Neeley
On Thu, Aug 28, 2008 at 9:44 AM, stamsund <stamsund@xxxxxxxxxxxxxx> wrote:
> Fellow coilers,
>
> Some time ago ordered some 1/2 inch copper tubing on e-bay which I
> incorrectly assumed was 1/2inch plumbing tubing. It was actually
> refrigeration tubing. I just gauged it and found it is actually only 3/8
> inch O.D. not 1/2 Inch as advertised. I'm building an 8 inch coil with (2)
> 12KV 60ma NSTs for a total of 120 MA. Would the 3/8 OD tubing be adequate
> for the primary or should I go larger?
>
> Rob R.
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla