[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Secondary to toriod ?
--- On Sun, 8/24/08, Jonathan Peakall <jpeakall@xxxxxxxxxxxx> wrote:
From: Jonathan Peakall <jpeakall@xxxxxxxxxxxx>
Subject: Re: [TCML] Secondary to toriod ?
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Date: Sunday, August 24, 2008, 2:39 PM
I did something like that.
http://madlabs.info/my_secondaries.shtml
Look at the very bottom of the page
Jonathan
www.madlabs.info
----------------------------------------------------------------------
Some people are like a Slinky .. not really good for anything,
but you still can't help but smile when you shove them down the stairs.
----------------------------------------------------------------------
This is kinda what i was proposing except it looks like you are using 2 secondary tops to isolate the bolt head where I just want to use a little plastic cover forthe bolt head itself. I am also wanting to use a 3 1/2" carriage bolt (not really sure why i would need that much room to adjust but i do)But anyway thanks for the replies think i will use this method as nylon allthreads cannot be found in my area.Stan
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla