[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] hyperbaric spark gap



Yes, I have a detailed drawing of a simple hyperbaric spark gap.  Set gap at
200 mils (0.2") Conact me off list and I will email it to you.

With cap value of .04 uF or less, a single gap with 3/4 copper pipe works
very well.  In the range of .05 to .07 uF pri cap, I use two hyperbarics
connected in series, each set at 100 mils.  Above .07 uF it's best to run a
rotary spark gap.

Dr. Resonance




On Wed, Apr 30, 2008 at 10:57 AM, douglas smith <eyemfedup2@xxxxxxxxx>
wrote:

> does any one have good diagram of hsg in detail  thanks
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it
> now.
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla