[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Winding Lathe Construction (fwd)



---------- Forwarded message ----------
Date: Tue, 18 Sep 2007 10:11:55 -0400
From: "Lau, Gary" <Gary.Lau@xxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: RE: Winding Lathe Construction (fwd)

A picture is worth a thousand words...  See bottom of
http://www.laushaus.com/tesla/secondary.htm

I wouldn't call it a lathe, but rather a winding jig.  All you need is a
small AC-powered hand drill, a variac, and some metal scraps to make
brackets.  You also need the end-caps to be well-centered.

Regards, Gary Lau
MA, USA

> From: Crispy <crispy@xxxxxxxxxxx>
> To: tesla@xxxxxxxxxx
> Subject: Winding Lathe Construction
> 
> Hello,
> Does anyone have any good plans for building a simple, cheap lathe to
> wind a coil on a 6" PVC sewer pipe form?  I need to be able to buy
> everything online, including the motor.
> 
> Thanks,
> Chris
> 
> 
>