Re: ballast are bogus!!! (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Wed, 05 Sep 2007 20:57:10 +0000
From: nancylavoie@xxxxxxxxxxx
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: ballast are bogus!!! (fwd)

How did you place the welder in the circuit? Did you have the welder
secondary output shorted together? Might want to look and make sure the
welder is in series with one leg of your low voltage side of the pig. This
practice is used throughout the world of electricity ( it's not like it's
just some ham fisted idea that some crackpot dreamed up in his basement).
I wouldn't recommend playing around with this kind of thing until you've
verified that both your household system and your ballast are up to snuff.
Don't want to be reading about any homeless or dead coilers anytime soon.
Wyatt

-------------- Original message -------------- 
From: "Tesla list" <tesla@xxxxxxxxxx> 

> 
> ---------- Forwarded message ---------- 
> Date: Wed, 5 Sep 2007 08:40:42 -0500 
> From: Harold Weiss 
> To: Tesla list 
> Subject: Re: ballast are bogus!!! (fwd) 
> 
> Hi Daryl, 
> 
> Careful doing that or the next thing that may be smoking will be the house 
> wiring. Check to see that it's not overloading the breaker. I have seen 
> breakers weld themselves shut leaving only the mains breaker as the only 
> cutoff. 
> 
> If you are really using a pig, you would have more than likely blown the 
> mains breaker. Current would have been in the hundreds of amps range. 
> 
> David E Weiss 
> > 
> > hello!! 
> > 
> > so i built a telsa coil last year? after lots of mesing around with it 
> > it work pretty good, like 6' sparks! i now sure wish taht i knew about 
> > you guys first! 
> > 
> > it has 950 turn secondaryand a 10 turn primary coil, made out of old 
> > welding cable. the 'pole pig' (heh) is 220volt and runs off the welding 
> > outlet from the dryer in the garage. i have an old SKIL saw with a 10" 
> > beam blade that work great for the rotary gap but the blade is good for 
> > only mabye 5 runs. 
> > 
> > but the website plans say to always use a 'ballast' like an old stick 
> > welder, with a pole pig. so i did? but now the welder started smoking a 
> > little bit, because it was already very old. 
> > 
> > so, i got mad and just took the welder out of the circuit. and guess 
> > what?? the coil works even better!!! it arcs way longer, and you can't 
> > even looka t the SKIL saw anymore while its running! the pole pig makes 
> > the hummy hummy thumpy sound too so now i guess its finally doing some 
> > work. 
> > 
> > so the whole ballast thing is a joke? i dont know what they were on when 
> > they said that. 
> > 
> > 
> > --------------------------------- 
> > Yahoo! oneSearch: Finally, mobile search that gives answers, not web 
> > links. 
> > 
> > 
> 
> 
> 
>