Re: dual mot tc (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Mon, 8 Oct 2007 20:57:20 EDT
From: Mddeming@xxxxxxx
To: tesla@xxxxxxxxxx
Subject: Re: dual mot tc (fwd)

 
In a message dated 10/8/07 10:21:21 A.M. Eastern Daylight Time,  
tesla@xxxxxxxxxx writes:


---------- Forwarded message ----------
Date: Sun, 7 Oct 2007  13:40:06 -0700
From: Clive Hansen <mrclivehansen@xxxxxxxxx>
To:  Tesla list <tesla@xxxxxxxxxx>
Subject: Re: dual mot tc (fwd)

I  think I have decided to possibly steer away from the mots and instead  use
an nst because of the lower output current for safety. Does anyone see  this
causing problems with the previously mentioned capacitor  setup?






Hi Clive,
 
The higher the tank voltage, the more likely it is that one or more bottles  
will fail after awhile. However, as cheap and easy to replace as bottles are,  
this should not be a problem. Just try to be consistent in bottle size, shape 
 and type, and fill each bottle to same level. This keeps capacitance fairly  
steady as you make replacements.you might want to float some oil on the top  
of each bottle and the bucket to keep down corona.
 
Good Luck!
 
Matt D.



************************************** See what's new at http://www.aol.com