Re: [TCML] Calculate Output Voltage

["resonance" <resonance@xxxxxxxxxxxx>]

Yes,   Vsec = V pri (peak value) x 70% x SQR (Lsec/Lpri)
This will be very close to reality.  It's important to accurately measure 
your spark gap setting to determine max voltage available to the cap.  It's 
not always Erms x 1.414 if the spark gap is set too close together.  See my 
chart on spark gap settings vs. voltage in the archives.

You can also operate it in single shot pulse mode and measure the spark 
length and use the chart I've posted in the archives.

Dr. Resonance

Resonance Research Corp.
www.resonanceresearch.com


----- Original Message ----- 
From: "Clive Hansen" <mrclivehansen@xxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Thursday, November 15, 2007 12:33 PM
Subject: [TCML] Calculate Output Voltage


> Hello,
>    I was wondering if anybody knows of a formula to calculate the 
> secondary voltage of a Tesla coil. The only one I thought to try was 
> Vout=(Vin/Pri)Sec which should work with a standard transformer if Vout is 
> voltage out, Vin is volts in, Pri is primary turns, and Sec is secondary 
> turns. However, this seems to be returning an extremely high voltage.
>
> Thanks,
> Clive
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla