Original poster: "Gerry Reynolds" <gerryreynolds@xxxxxxxxxxxxx> Hi John,This issue has come up before and I dont remember a good answer, so I made my own. You can see pictures of it at:
http://hot-streamer.com/temp/GerryReynolds/5kw Maybe this can stimulate new ideas. Gerry R.
Original poster: johnbrooks@xxxxxxxxxxx Gentelman: I need to connect my 20 inch, G10/F4 disk to a 3/4 inch shaft motor. I don't know what the part (faceplate?,mandral?) is called,I have searched and searched.It seems there should be a ready made part,otherwise its back to the machine shop. Cheers John -- johnbrooks@xxxxxxxxxxx -- http://www.fastmail.fm - The professional email service