[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: New video



Original poster: "CajunCoiler" <cajuncoiler@xxxxxxxxxxx>


Indeed they are hard to get working right! :)

My plan at this point, is to add a 2nd NST, and
adjust the tank capacitance. (8751v@60mA/25nf)

The only thing that really disturbs me about these
smaller coils, is the lower transformer voltage
makes it take longer to reach a "bang" level,
while turning up the variac.  This guy starts
firing at about 55 volts in.  Ol Kong Sr. would
start firing at 26 volts... but then, he was
using a pair of 15kv NST's... gives me the
disturbing feeling that I'm wasting half of my
variac... although we all know it doesn't work
that way. :)



> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx]
> Sent: Monday, March 12, 2007 11:06 PM
> To: tesla@xxxxxxxxxx
> Subject: Re: New video
>
>
> Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>
>
> Hi Chris,
>
> Enjoyed your video and write-ups! Hard as hell to get those little
> coils operating as wanted, isn't it! I looked at your Kong Jr. specs.
> I assume your tuning in a little over 10 turns? Well, what do you
> plan to get that little guy performing? You can always add more power
> (you already know that), but anything else keeping the same power
> range? I've had the same problems on a similar coil both in power and
> size (it's not the toroid size). The Freau number is far off and I'm
> uncertain to relate it to the low voltage or coil size itself (or both).
>
> Take care,
> Bart
>
> Tesla list wrote:
>
> >Original poster: "CajunCoiler" <cajuncoiler@xxxxxxxxxxx>
> >
> >
> >As previously listed at...
> >http://msbdatasystems.com/cajuncoiler/kongjr.txt
> >
> >Transformer: Magnetek 725-151-401 NST (7500v/30mA) operated
> >              at 140v for 8751v/30mA operation.
> >http://msbdatasystems.com/Docs/Docs_cc/magnetek_725-151-401-0.pdf
> >
> >Spark gap: fan-quenched single gap.
> >http://msbdatasystems.com/Docs/Docs_cc/sparkgap_kongjr.pdf
> >
> >Tank Capacitor:
> >                 15nf MMC (CDE #942C20P15K-F x 10)
> >http://msbdatasystems.com/Docs/Docs_cc/KongJr_MMC.pdf
> >
> >Let me know if I'm going too fast for ya. :)
> >
> >
> > > -----Original Message-----
> > > From: Tesla list [mailto:tesla@xxxxxxxxxx]
> > > Sent: Friday, March 09, 2007 10:09 PM
> > > To: tesla@xxxxxxxxxx
> > > Subject: Re: New video
> > >
> > >
> > > Original poster: kens.coil@xxxxxxxxxxx
> > >
> > > OK ,What is the cap the spark gap and transformer of this coil?
> > >
> > > -------------- Original message --------------
> > > From: "Tesla list" <tesla@xxxxxxxxxx>
> > >
> > >  > Original poster: "CajunCoiler"
> > >  >
> > >  > For those of you that are interested, there is a
> > >  > short video on my web site, depicting the dismal
> > >  > results of the "Kong Jr" first light.
> > >  >
> > >  > See also:
> > >  > http://msbdatasystems.com/Media/Media_cc/KongJr_1stLight.mpg
> > >  >
> > >  >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
>