[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: The ideal DC coil power supply? RE: RE: Xfmrs



Original poster: Jim Lux <jimlux@xxxxxxxxxxxxx>

At 01:42 PM 3/3/2007, Tesla list wrote:
Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>

How about an RCS-1000 YAG PSU?

http://www.hot-streamer.com/adam/garage/psu_34kV_1.jpg
http://www.hot-streamer.com/adam/garage/psu_34kV_2.jpg

It's 17" x 6" x 6", weighs in at 17 pounds, cranks out
up to 34 kVDC at 1 kJ/sec, and runs off of 200 - 240
VAC.


1 kJ/sec is about an order of magnitude too small.. 10kW = 10kJ/sec

I worked with one of the Maxwell labs charging supplies a few years ago. It was in that category, but it wouldn't have worked for a tesla coil. If you shorted the output, it tripped internal protection, and shut down, requiring a reset.

But that IS the right idea. I'm thinking of a purpose designed DC charging supply.