Re: vttc_project_picture

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Skip Malley <skip@xxxxxxxxxxxxxxx>

That is a part I was not familiar with.  I did a bit of looking 
around and found some useful info on the Litelfuse web site.

Here is an application note with schematics 
http://www.littelfuse.com/data/en/Application_Notes/AN1003.pdf

Triac Data sheet 
http://www.littelfuse.com/data/en/Data_Sheets/E4AlternistorTriac.pdf

Alternistor page 
http://www.littelfuse.com/cgi-bin/r.cgi/en/prod_series.html?SeriesID=593&LFSESSION=fnGohWFUJb

Enjoy

Skip

At 11:20 PM 1/29/2007, you wrote:

> Build your own dimmer using an alternistor in place of the triac --- 
> they are specifically design for inductive loads.
>
> Dr. Resonance