Re: Wire Table

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "huil888" <huil888@xxxxxxxxxxxx>

The best on-line source for magnet wire dimensions that I've found is 
the Piremag website, apparently a subsidiary of Pirelli (www.piremag.com).

The magnet wire dimensional chart provides bare wire diameter, 
electrical resistance, and single & double build diameter for 
enameled copper magnet wire from #4 AWG through #50 AWG, in both 
metric and inch units. See: http://www.piremag.com/technical.htm#conventional

There is also a separate chart with dimensions of "bondable" magnet 
wire (pre-coated with a solvent or heat activated adhesive).

Regards,
Scott Hanson

----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Sunday, February 18, 2007 6:03 PM
Subject: Wire Table


> Original poster: Frank <fxrays@xxxxxxxxxx>
>
> Hi All,
> Does anyone have a source for wire tables that list the dia's of 
> SCC, DCC, bare and enameled wires? They need to give the OD's for 
> the wire including the covering or varnish as the OD.s are different 
> for the same size wire dependent on the covering.
> I have searched on the web and my books and no luck so far.
> It would be useful for rebuilding old designs where the wire was 
> given in SCC or DCC (Single Cotton Covered or Double Cotton Covered).
> Thanks!