[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PHISH] Re: 4 stage SISG



Original poster: "Anthony R. Mollner" <penny831@xxxxxxxxxxxxx>

Speaking of which, I'm making a static gap for my small scale TC now. It's a
little 4" secondary with 1700 turns. I was planning on a two gap spark gap
using the those evil thoriated tungsten rods. Any thoughts on the number of
gaps that should be used for best quenching in a little 15/30 TC? For that
matter, is a fan really necessary at this low level?

Tony

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Saturday, February 17, 2007 4:27 PM
To: tesla@xxxxxxxxxx
Subject: [PHISH] Re: 4 stage SISG


Original poster: Finn Hammer <f-h@xxxx>



Tesla list skrev:
>Original poster: "Mark R Dunn" <teslamark@xxxxxxxxxxxxx>

>Spark Gaps, ARSG's, and SRSG's are now a part of history like the dinosaur.
>Mark


True from a bleeding edge point of view.

However:

 From an economic point of view, a good mechanical static spark gap
is hard to beat.

Cheers, Finn Hammer