Re: Line filter -- where to ground it?

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Antonio Carlos M. de Queiroz" <acmdq@xxxxxxxxxx>

Tesla list wrote:
> Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
>
> Hi Forest,
>
> The only added comment I have is wiring the filter in "backwards".
> Most filters are designed to keep stuff from getting back onto the 
> line cord. Some filters are symetrical and how you wire it would not 
> matter.  If your filter has a LOAD end and a LINE end, I would wire 
> it up that way and NOT wire it "backwards".
>
> Gerry R.
Passive filters, supposing resistive impedances on both sides, are 
always symmetrical. Of course this is not true if there are voltage 
limiting devices at just one side.

Antonio Carlos M. de Queiroz