Re: [TCML] Oil insulated coils

[Robert M Janson <rmej@xxxxxxxx>]

 I plan to fill my 11" diameter by 60" tall secondary coil with oil,
because of arc striking the winding.  It would take less than 2 gal of
oil to fill it up because I'm putting 11" PVC duct pipe inside a 12" PVC
duct pipe.  Has anyone tried that with a large coil?

Rob

On Sun, 9 Dec 2007 10:13:56 EST FutureT@xxxxxxx writes:
>  
> In a message dated 12/8/2007 10:10:24 P.M. US Eastern Standard Time, 
>  
> bartb@xxxxxxxxxxxxxxxx writes:
> 
> >Well, I guess someone could build a little 
> >coil under these  conditions at home, but
> >not so easy for a moderate to 
> >large coil.
> 
> >Take  care,
> >Bart
> 
> 
> Bart, all,
>  
> Has anyone on this list built a TC and put the coil  partly
> under oil or another dielectric fluid to see how  much coupling 
> could be tolerated?  It would  be an interesting experiment.
>  
> John
> 
> 
> 
> 
> 
> 
> 
> 
> 
> **************************************Check out AOL's list of 2007's 
> hottest 
> products.
>
(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001
)
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
> 
> 
 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla