Re: [TCML] Re: Spark gap Resistance

["nnanred1@xxxxxxxxxxx" <nnanred1@xxxxxxxxxxx>]

hi,
the greatest efficiency occurs when the primary and secondary circuits resonate at the same frequency when they are decoupled.  k=0.  then you couple the circuits so that k= 0.6, 0.54, 0.385, 0.125.  when you do this the 2 coexisting waves in the coupled system have a frequency ratio of 2.  this causes an alignment of the 2 voltage waves and obtains a maximum in voltage or pulse power.
get the paper by j. r. reed, "Greater voltage gain for Tesla transformer accelerators" in october 1988 issue of Review of Scientific Instruments and there is a test procedure to set the coef. of coupling so simple a child can do it.
The paper is written to disclose the grand max in performance for the transformer with a coupling of about 0.54.  The national labs use a coupling of 0.6;  but dont let any of that worry you. the k setting procedure is good for any coupling; like k=0.12.
people read this paper and think it is for the higher couplings.  it can install any coupling if u have an o-scope or electron voltmeter and a signal generator to tickle the coupled circuit with. 
it really is simple.  and these operating points will produce the best transformers.  what holds it back is reading comprehension.
by now,

_____________________________________________________________
Click here for great computer networking solutions!
http://thirdpartyoffers.netzero.net/TGL2221/fc/Ioyw6i4vC4g0tC9jFFJF8P3McTs3BPRpGihta74aWuscdicT5bPYSB/
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla