Re: V11.1 for JAVATC (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Thu, 30 Aug 2007 21:15:36 -0700
From: Bob Wedeen <bob.wedeen@xxxxxxxxxxxxxxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: V11.1 for JAVATC (fwd)

Just a quick question. I'm building my first Tesla coil and have seen at 
least two topologies: 1) main capacitor across NST secondary followed by 
series spark gap. 2) spark gap across NST secondary followed by series 
capacitor.  I will be using the Terry Fritz protection filter directly after 
the NST. Any recommendations on which topology to use?

Thank you.

----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Thursday, August 30, 2007 8:56 PM
Subject: Re: V11.1 for JAVATC (fwd)


>
> ---------- Forwarded message ----------
> Date: Thu, 30 Aug 2007 23:58:54 -0400
> From: Slurp812 <slurp812@xxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: Re: V11.1 for JAVATC (fwd)
>
> I was just recently using JavaTC to work out some of the last details.
> before I finish my coil. This is an excellent program! I also work ion
> the IT field, and I am familiar with what we call a dot-0 release!
> With out you and just about everyone else on this list, I wouldn't
> almost have a working coil. I need a few more things, and lots more
> time, but it will make sparks, someday. I only have one question, is
> there anyway to "load" coil data in via a data file of some sort?
>
>
> On 8/27/07, Tesla list <tesla@xxxxxxxxxx> wrote:
>>
>> ---------- Forwarded message ----------
>> Date: Sun, 26 Aug 2007 12:33:56 -0700
>> From: Barton B. Anderson <bartb@xxxxxxxxxxxxxxxx>
>> To: Tesla list <tesla@xxxxxxxxxx>
>> Subject: V11.1 for JAVATC
>>
>> Hi All,
>>
>> I uploaded version 11.1 to replace V11.
>>
>> (D.C., I'll send another CD).
>>
>
>
>
>
>