[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Laser and tesla coil (fwd)



---------- Forwarded message ----------
Date: Sun, 12 Aug 2007 14:31:59 -0500
From: resonance <resonance@xxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Laser and tesla coil (fwd)



By connecting them in series and parallel you could build a 50 uF 10 kV DC 
electromagnetic soda can crusher.  Use an ignitron for switching and a 3 
turn #4 AWG coil for the "crush" coil.


Dr. Resonance

Resonance Research Corp.
www.resonanceresearch.com


----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Sunday, August 12, 2007 7:52 AM
Subject: Re: Laser and tesla coil (fwd)


>
> ---------- Forwarded message ----------
> Date: Sun, 12 Aug 2007 10:39:08 +0300
> From: Tomas Stankevic <Tomas.Stankevic@xxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: Re: Laser and tesla coil (fwd)
>
> Hi, I have some caps, about fifty maybe. They are 1kV 100uF each, oil
> filled. Each is about 40cm x 25cm x 15cm so the whole stack is about
> 1x1x0.5 m (at least). Its really heavy. We used 2 cars, almost full
> trunks to bring them.
>
> What can I do with them? Capacity is too big for Tesla coil...
>
> Tomas
>
>
>
>