[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: nst problems

To: tesla@xxxxxxxxxx
Subject: Re: nst problems
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Mon, 16 Apr 2007 12:37:03 -0600
Delivered-to: chip@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <tcmlmod@xxxxxxxxxxxxx>
Resent-date: Mon, 16 Apr 2007 12:36:50 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <LddGDtECT7B.A.7b.AJ8IGB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: SCOTT EWING <scottewing@xxxxxxxxxxxxx>

Try running xfmr #1 on line one and xfmr #2 on line two with a sharedneutral. That is the setup I use on my coils. Hope this helps.^^^


Tesla list <tesla@xxxxxxxxxx> wrote:
Original poster: Jim

Hi Folks:

My 2 - paralleled 9kv, 30ma nsts are not putting out any power. Would
it be wise to bypass the auto reset on these things? The cat# is 9030
PG but franceformer has no data on them on their website.

Thanks,

Jim

Prev by Date: Re: contact spark gap
Next by Date: Re: Re: [] Re: Thoraited Tungsten Rods
Previous by thread: nst problems
Next by thread: Re: nst problems
Index(es):
- Date
- Thread