[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How to join secondary wires, was intro + coil questions



Original poster: "david baehr" <dfb25@xxxxxxxxxxx>

this is how I did it,..it seems to work well ;-)






From:  "Tesla list" <tesla@xxxxxxxxxx>
To:  tesla@xxxxxxxxxx
Subject:  Re: How to join secondary wires, was intro + coil questions
Date:  Sat, 31 Mar 2007 20:05:18 -0600
>Original poster: FutureT@xxxxxxx
>
>In a message dated 3/30/07 11:45:27 PM Eastern Standard Time,
>tesla@xxxxxxxxxx writes:
>

 These consist of the ends soldered
>>together
>> >(with minimal 'sharpness') and sleeving places over the join,
>>then
>> >epoxy sealed using araldite. Will this give me any problems?
>
>
>



----------
<http://g.msn.com/8HMAENUS/2752??PS=47575>Mortgage refinance is hot 1) Rates near 30-yr lows 2) Good credit get intro-rate 4.625%*