[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Main spark gap across one or both transformer legs?
Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Hi,
At 05:25 PM 10/3/2006, you wrote:
Ok.... the only caps I have right now are 11x 910pF caps.... so the
highest capacitance I can go is 0.01uF
If I were to use a 12000v 30ma transformer needing
0.006631uF then would it be safe using 0.01uF with pi/2*
0.006631 = 0.010416uF is that safe enough?
Yes ;-)))
You are the first person to tell me about this rule.... everywhere
else I have read it says resonant.
It "used" to be cool... But no longer... All the old books and
stuff from 5+ years back are all wrong now :-((
for a 9kv 30ma transformer 11x 910pf is still low.....
Better... 9kV transformers are tough... Hard to say... I would worry...
Cheers,
Terry
...........