toroid construction, was balancing choke

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

Hi Finn,

What is the reason for the equatorial cut in your toroid on you site? I have
4 pieces of 12" (30.5cm) aluminum duct. I figured the less expansion the
stronger it will be. It will total out at 60" (152cm).

Thanks,
Jim Mora

Man, you can make everything from scratch!

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Thursday, November 30, 2006 1:36 PM
To: tesla@xxxxxxxxxx
Subject: Parallelling chokes the right way

Original poster: Finn Hammer <f-h@xxxx>

Here is a schematic showing how to install the parallelling chokes in
a way that make them perform the desired function.
http://home5.inet.tele.dk/f-hammer/chokes.jpeg

Cheers, Finn Hammer

http://home5.inet.tele.dk/f-hammer/tesla/tesla.htm