Re: once again...the correct schematic...

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>

Hi Jim,

It does look like a step up transformer, but the 
connections seem to be labeled correctly.  The 
taps are actually on the secondary, as labeled, 
and the primary is in series with the PIG, as labeled, so I think it is OK.

Gerry R.


Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

PS. The buzz box doesn't look right. The primary (our series load
inductance) has more turns than the secondary since it is a step down
transformer. Someone please verify this note. I haven't taken my Lincoln
apart to see where the taps are.

Thanks
Jim Mora


-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Wednesday, November 29, 2006 11:09 AM
To: tesla@xxxxxxxxxx
Subject: once again...the correct schematic...

Original poster: "Chip Ford" <chipford@xxxxxxxxxxxx>

Here is my 7th. revision to the schematic with
the appropriate changes made to the choke
setup...Thanks again to everyone..Chip...Ü

http://hot-streamer.com/temp/Parallized6.JPG