RE: once again...the correct schematic...

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>

Here's a Lincoln AC-225-S schematic:

http://www.hot-streamer.com/adam/bigass_coil/welder2.jpg

Adam

--- Tesla list <tesla@xxxxxxxxxx> wrote:

> Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>
>
> PS. The buzz box doesn't look right. The primary
> (our series load
> inductance) has more turns than the secondary since
> it is a step down
> transformer. Someone please verify this note. I
> haven't taken my Lincoln
> apart to see where the taps are.
>
> Thanks
> Jim Mora
>
>
> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx]
> Sent: Wednesday, November 29, 2006 11:09 AM
> To: tesla@xxxxxxxxxx
> Subject: once again...the correct schematic...
>
> Original poster: "Chip Ford" <chipford@xxxxxxxxxxxx>
>
> Here is my 7th. revision to the schematic with
> the appropriate changes made to the choke
> setup...Thanks again to everyone..Chip...Ü
>
> http://hot-streamer.com/temp/Parallized6.JPG
>
>
>