Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Hi Bart and Stan,
At 08:11 PM 11/3/2006, Bart wrote:
Hi Terry,
It's looking good! Tonight on the way back from dinner, I drove by
a house that had ball lights on a pillar in their yard. It reminded
me of your topload stack. There were 4 ball lights configured as
your topload and about the same size. What was different is that
there was a ball in the center of the 4 outer balls.
Looking at the picture you showed where the corona is streaming off
the secondary is probably a good indication that a center disc laid
on top of the rods and about the inner diameter of the balls would
help eliminate that corona.
"Looking at it", the balls are probably too high. I will cut the
center rod down about 2 inches. That should fix it.