RE: (Fwd) bleeder resistors used with MMC

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "CajunCoiler" <cajuncoiler@xxxxxxxxxxx>


Try this document...
http://msbdatasystems.com/Docs/Docs_cc/KongJr_MMC.pdf


> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx]
> Sent: Thursday, November 02, 2006 3:33 PM
> To: tesla@xxxxxxxxxx
> Subject: (Fwd) bleeder resistors used with MMC
>
>
> Original poster: wysock@xxxxxxx
>
>
> ------- Forwarded message follows -------
> From:           	Self <wysock@xxxxxxx>
> To:             	Terry Fritz <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
> Subject:        	bleeder resistors used with MMC
> Date sent:      	Thu, 02 Nov 2006 11:07:53 -0800
>
> Terry,
>
> I've spent a lot of time surching the List archives and so far have
> not found an answer to my question.  What would you recommend
> as the best size (in megohms I would presume), and wattage level
> to use with an MMC stack?  I just bought 12 of the CD-942's and
> will be using all of them in series for a final cap rating of .012 mfd.
>
> I know many folks have used resistors to equalize the voltage
> distribution in these series strings.  Unfortuantely, I never saved
> any of those posts to the List.  Any help or advice you can give
> will be greatly appreciated.
>
> Best regards,
> Bill Wysock.
> ------- End of forwarded message -------
>
>