[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Coil dimensions

To: tesla@xxxxxxxxxx
Subject: Re: Coil dimensions
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Sat, 27 May 2006 15:30:50 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Sat, 27 May 2006 15:15:35 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <W6gDdW90LdL.A.iRF.3FMeEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>

On coil diameters of 4 inches and above, always use a flat Archmedianspiral. Sec OD to sec winding length should be in the range of 1:4ratio. Usually procedure is to set approx 8-12 turns on primary andadjust capacitance to match resonance point. The equations forinductance of flat spirals and resonance are in the Tesla List archives.


Where is your physical location --- city?


Dr. Resonance

What determines the coil dimensions for the primary and secondarycoils (ex. secondary height, number of coils on primary andsecondary, shape of primary, diameter of primary and secondary,etc.)? What equations are used? Thanks.
Andrew

Prev by Date: Re: Racing Spark Prediction
Next by Date: Re: Continuously variable primary
Previous by thread: Coil dimensions
Next by thread: Re: Coil dimensions
Index(es):
- Date
- Thread