[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: NEW? CDE caps



Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>

Hi,

The "new" caps are fine. They changed the specs too from the old but all for the better. They are using a better polymer now so the temp specs are higher and they wind them a bit better so the size is smaller. Poly caps are still evolving so they change a bit now and then, but nothing to worry about. They are or will go lead free soon and that will raise the price about 10%.

Cheers,

        Terry


At 11:14 AM 5/15/2006, you wrote:
I received a few days ago some CD caps from Dr. R , quick service and good looking caps­Thanks Dr. R . I started to lay then on my pre-drilled Lexan sheet used to mount them on and they looked a little small from the spec sheet I had downloaded from CDE. Not a big difference but to a machinist trained eye I could see it. Has any one tested the new smaller caps?

OLD   942C20P15K-od-is 1.161, length 1.811

NEW 942C20P15K-F-od-is .975, length is 1.75

Rich , from the middle of Missouri